Warpcomm.org

Home

Documentation

Software

Support

Links / References

General

Software

For the time being the software for the TK71 can be found in the downloads directory of this server and is a collection of sourcecode and binary ready-to-run program images.

This is the Readme.txt that can be found in the downloads directory which explains its content:

Binary release for Warpcomm TK71 board support:

Root filesystem:
	mucross-1.0-samba-server-image-tk71-summary.jffs2
	mucross-1.0-samba-server-image-tk71.tar.gz
Root filesystem from Angstrom:
	angstrom.jffs2
	angstrom-sum.jffs2
OpenOCD config for 512MB RAM modules:
	tk71-512M.cfg
UBoot bootloader:
	u-boot
	u-boot.kwb
UBoot bootloader for 512MB RAM modules:
	u-boot.kwb
Linux kenrel, V2.6.34:
	uImage
Linux kernel patch for TK71 support against vanilla 2.6.34:
	linux-2.6.34-tk71.diff
UBoot patch against git://git.denx.de/u-boot-marvell.git:
	u-boot-marvell.diff
Cross toolchain:
	mucross-1.0-armv5te-linux-gnueabi-toolchain.tar.bz2

For installation instructions see:
	http://www.warpcomm.org/docs/tk71/

Changes:
- Update kernel to 2.6.34
- Enable kernel MV CESA crypto driver
- Enable MV Orion watchdog driver
- Enable NTFS support including write support
- Special version of OpenOCD config and u-boot.kwb for TK71 modules
  with 512MB RAM
- To recompile the UBoot, set path with cross toolchain correctly, set ARCH
  and cross-compile flags and then
	make tk71_config
	make USE_PRIVATE_LIBGCC=yes
	make USE_PRIVATE_LIBGCC=yes u-boot.kwb

© 2019 by ID3P